Digital Music Changer(YT-M06)
Customs code(HS code):8522909100
l Module size: 92 x 65 x 16.5mm
l CDC plug length:95cm; AUXcable length: 50cm
l Standard Packing box: 210 x 150 x 60mm
l Half-size packing box: 150 x 105 x 60mm
l Module weight: 90g;
l Gross weight: 220g-400g;
l 50 standard boxes/big carton
This is an Audio car kit. It is a replacement of CD changer. It can
be easily installed and used. The installation and usage are the
same as CD changer's installation and usage, Simply plug in USB
disk/SD card, you can play audio through car audio system and enjoy
music in your car.After conneted with optional Bluetooth module kit ,it integratesbluetooth hands free phone call and stream mobile
phone’s A2DP music playback into car stereo system.
l Voltage Input : 11V~14.6V DC
l Operational Current : 200mA
l Standby Current : 3mA
l Operating Temperature: -35℃~+85℃
l DAC Resolution : 20bit
l Total Harmonic Distortion : 0.05%
l SN Ratio : 90dB
l Frequency Response : 20HZ-20KHZ
l Module case is made of aluminum alloy
1. Plug&play, modular design,CDC alternative
2. Connected with wire harness, not FM signal controlled ,Hi-Fi
3. Controlled by vehicle Head Unit,support Steering wheel operation
4. With Hi-Fi Decoding Chip,perfectly support MP3 and WMA tracks
5. Supports SD/SDHC/MMC card/U Disk/Card Reader/Hard Disk
6. Supports external audio source(MP4 PSP Mobile Phone) via AUX in
7. Playlist function same as multi CDs
8. Supports Last Position Memory(LPM)
9. Vibration and interference proof
10. Easy to install,no damage to original car decoration
11. Different module firmware versions for different types of
protocol of car stereos
12. With BT slot for additional Bluetooth hands-free kit(YT-BTM).
Supported memory cards and USB sticks:
1.Max 8GB (2GB is most recommended);SD card is more recommended
than USB stick.
2.Please format USB stick or SD card with FAT16 or FAT32 format
before you save files and folders in USB/SD.
3. Imposed folder naming system: CD01, CD02, CD03 ....
Doesn't read sub-folder and gets confused with other names in root
of the drive.
4.Supports up to 15 folders (depending on the radio type) on your
5.Any number of songs can be stored in each folder, but the display
of most radio models can only screen 99 track titles; Saving too
big file(over 50MB) in any folder may also cause intermittent
6.Using music files formats other than WMA and MP3 may also cause
7. The playback order of songs is in line with their created date.
8.Sometimes,to remove defect on software of car audio system, you
may need to disconnect the battery or remove the fuse to reset the
car audio system.
9.To use the Aux-In port, it's necessary to remove the USB or SD
10.YT-M06 may does not work with some of new Kingston brand USB
Bluetooh Module (YT-BTM)
Customs code (HS code):8522909100
If you already have YT-M06 or YT-M05 on hand and you want to
purchase YT-BTM , Please check your BT slot carefully and notify
the seller the type of BT slot you own before your purchase
Video guidance: http://www.youtube.com/watch?v=Mhq7sIRKp_4
Bluetooth module cable length: 200cm;
Microphone cable length: 200cm
Packing box: 150 x 105 x 60mm
- Module Unit*1(2 meters long)
- 3.5mm Microphone*1 (2 meters long)
- Remote Control Unit*1 (Optional, 2 meters long)
- User Manual*1
This is a universal additional kit (add-on accessory) for YT-M05
and YT-M06, integrates Bluetooth Hands free (HFP) and Bluetooth
Audio playback (A2DP) music streaming into your car stereo system.
It supports operations of Answer/Hang-up phone call and Pause/Play
A2DP playback via button on YT-BTM or Seek+ button or Fast Forward
button of radio.
1. Hands free phone call via factory car stereo system.
2. Wireless Bluetooth A2DP music streaming into factory car stereo
3. Controlled via YT-BTM button,YT-REMO button, car radio button
and Steering wheel button.
4. Excellent quality sound from radio speaker and from microphone
for HFP and A2DP.
5.LED indicator continuously displays the working status of YT-BTM
6. Automaticly pauses when a phone call is made or received, then
resume once the call has ended (Requires pressing CD button to resume A2DP playback on YT-M05).
7. Supports connected with only one Bluetooth device each time.
Supports Bluetooth enabled devices like iPhone,Android phone,other
bluetooh capable phone ,bluetooth enabled GPS,etc.
8. Bluetooth distance limitation: 6-8 meters.
9. Bluetooth pairing needs to be performed only once.
After pairing is completed ,your phone will automatically connect
to YT-BTM upon ignition start (whether radio on or off) or once
your phone is back into discoverable distance.
10. No need to disconnect other audio sources to use Bluetooth.
Once YT-BTM is in use, other audio sources (USB/SD/iPod/AUX) will
be automatically paused (except AUX) and muted.
11. Supports Bluetooth Voice Dialing .
Special for mobile phones supporting voice dialing over Bluetooth
12.compatible with Bluetooth version 2.1, and downward compatible
with lower Bluetooth version
1. After finishing installation for Yatour YT-M06 or Yatour
YT-M05,connect YT-BTM to bluetooth port of YT-M06 or YT-M05. Mount
the YT-BTM module away from metal structures in the dash and as
close to the phone as possible.
2. Then connect our microphone to microphone port of YT-BTM. Choose
a proper mounting location for the microphone either on the upper
part of A-pillar on driver side or near centre rear view mirror or
head liner console control panels region. Avoid mounting the
microphone by the side windows to eliminate extra noise. Please
also avoid mounting behind visor to avoid blocking voice from
reaching the microphone.
3. Carefully route the microphone cable down into the dash where
the YT-BTM module is installed. Carefully arrange plugs at last.
4. Turn on the car stereo and switch to CD mode, then start to pair
your mobile phone with YT-BTM.
If users already have Remote Control Unit (YT-REMO), Bluetooth module could be hidden under radio panel or glove box
etc, and only Remote Control Unit’s small head is placed and seen
on radio panel or A pillar or any other positions easily touched
bydriver, and carefully arrange plugs at last.
Simply pair it with any Bluetooth enabled mobile phone, and it will
allow you to make and receive calls hands free through your car
stereo speakers. Also provides a separate microphone for added
convenience and optimum sound quality. Music playing automatically
pauses when a call is made or received and then :
1. Automatically resumes when call is ended on YT-M06;
2. Resumes via pressing radio CD buttons on YT-M05;
Supports Bluetooth version 2.1 and lower version
Compatible with most Bluetooth-enabled phones
Instruction Manual download : http://img.mysoocuu.com/photo/ycarlink/catalog/20120810015407_1810.pdf
How to connect YT-BTM with YT-M06/YT-M05:
1. Is YT-BTM able to work independently?
No, it has to be used together with Yatour YT-M06 or YT-M05.
2. Can I use my own microphone to replace YT-BTM’s microphone?
It is not recommended to use customer’s own microphone,because a
different microphone with different gain factor may reduce sound
3. If the radio is off, can YT-BTM work?
No, if the radio is off or if it is not under CD mode, YT-BTM will
not work normally. But if there is a call coming, customers can
immediately turn on the radio and switch to CD mode, and YT-BTM
will work normally.
4. How to adjust sound volume of YT-BTM?
YT-BTM currently does not offer independent sound volume adjusting
function, customers can directly control sound volume through car
5. How many mobile phones can be connected to YT-BTM at the same
YT-BTM currently can allow being connected with only one mobile
phone at one time. YT-BTM requires disconnecting one mobile phone
so as to reconnect to another mobile phone.
6. When a call comes in, will the playback of USB/SD/AUX/iPod be
When a call comes in, YT-M05 iPod playback and YT-M06 USB/SD
playback will automatically stop and be mute. AUX playback of
YT-M05/YT-M06 will only be mute but not stop as AUX playback is not
controlled by Yatour interface.